Inovonics FA116 Bedienungsanleitung PDF herunterladen (Seite 5)

LIT-FA116-USER 01860

Programming FA416 and FA464 Receivers

Press

ENTER

to review or to modify receiver settings.

Press

ÅÅ

to go to

Output Setup

menu or

ÆÆ

for

Review Points

System ID is encoded in all data transmissions to identify transmitters

to their respective receivers. Enter a code from

000

255

Should the receiver monitor transmitters for inactivity?

Arrow keys toggle between

YES

and

How long should the receiver wait for a supervisory signal to declare

points inactive?

Enter value from

99.

Arrow keys toggle between

MIN

and

HRS

To change dealer access code enter number from

0000

9999

(

3446

is default.)

Note:

Default access code may be reset ONLY by

restoring receiver to factory defaults. See below.

Should the receiver look for transmitter data for Vision Plus systems?

Arrow keys toggle between

YES

and

Reminder:

Press

ENTER

to advance to next menu option.

ENTER

accepts data in display and proceeds.

What is "Vision Plus Compatibility"?

Vision Plus Compatibility permits transmitters programmed by a the Vision Plus panel to be monitored by an

FA416 or an FA464 receiver AS LONG AS BOTH SYSTEMS HAVE THE SAME SYSTEM ID.Transmitters

monitored by FA receivers need not be programmed by the receiver. Once the receiver hears a Vision Plus-

programmed transmitter, the receiver will consider it one of its own. (Note: any transmitters programmed by

an FA416 receiver will NOT be received by a Vision Plus .)

Initializing FA416 or FA464 receivers:

The following sequence will restore the receiver to factory default

settings: (

ADV

RESET

and

DEL

Buttons are located on the receiver.)

1. Press and Hold

ADV.

2. Press and release

RESET

3. Release

ADV

4. Immediately, while the Decode and Valid LEDs are off, press and hold

DEL

for 6 to 7 seconds.

5. The receiver will flash the

TX PRGM LED

indicating restoral complete.

Refer to appropriate appendices for factory default settings.

SYSTEM ID: 123

ACCESS CODE

3446

VISION COMPATIBLE

MAX TX INACTIVE

TIME: 4

HRS

SUPERVISE POINTS

YES

Press ENTER for

RCVR SETUP

Receiver

Setup

1 2 3 4 5 6 7 8 9 10 ... 20 21

Kommentare zu diesen Handbüchern

Keine Kommentare

Inovonics FA116 Bedienungsanleitung Seite 5

Kommentare zu diesen Handbüchern